| |
 |
 |
 |
|
Saved me at least $900 |
April 6, 2022 |
| Reviewer:
Patrick from Raleigh, NC United States
|
|
Precision cut, and self installation is not hard at all. I will say a few things, it says 1/2 inch staples in the instructions you want to use 3/8 for the back and 1/4 for the front. Also before you get the front and sides fully stapled/glued the back will look like it’s not going to be flush with the back window but it will in the end.
Also while the fabric that the glass is adhered too has notched cut out the top layer doesn’t so you will have to cut those out by hand. But the precut notches made it WAY simpler to attached the headliner pieces to the top, that was my biggest concern. Also amazed that they but a chalk line on the top layer to make lining everything up a lot more simple and without that don’t think I would of gotten a he headliner in as smoothly or that it would of looked as smooth in the end.
If you can operate a staple gun you can do this with patience, a little common sense, and the instructions provided. Took about 7 hours.
Was this review helpful to you? 
|
|
 |
|
 |
|
